国产一级毛片电影,国产精彩av,亚洲欧洲

Radel? R-5500

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Radel PPSU
Product No: Radel R-5500
Product Quantity: 25KG / BAG
Product Features: Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)，High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness

Product information

Radel? R-5500

Polyphenylsulfone

Solvay Specialty Polymers

Product Description:

Radel? R-5500 is a general purpose extrusion grade of polyphenylsulfone (PPSU), offering exceptional hydrolytic stability and better toughness than most commercially available high-temperature polymers. This resin has a high heat deflection temperature, excellent thermal stability, outstanding resistance to environmental stress cracking, good electrical properties and inherent flame retardant properties. Transparent and opaque colors are available.

Transparent Grades:

Natural: Radel? R-5500 NT

Opaque Grades:

Black: Radel? R-5500 BK937

Bone: Radel? R-5500 NT15

Grey: Radel? R-5500 GY1137

Grey: Radel? R-5500 GY1037

Grey: Radel? R-5500 GY874

Red: Radel? R-5500 RD1018

Orange: Radel? R-5500 OR1145

Yellow: Radel? R-5500 YL1337

Green: Radel? R-5500 GN1007

Blue: Radel? R-5500 BU1027

Blue: Radel? R-5500 BU391

Violet: Radel? R-5500 VT2582

Brown: Radel? R-5500 BN1164

Features	Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness
Uses	Aerospace Applications，Aircraft Applications，Dental Applications，Food Service Applications，Hospital Goods，Medical Devices，Medical/Healthcare Applications，Membranes，Surgical Instruments
Agency Ratings	ISO 10993
RoHS Compliance	RoHS Compliant
Appearance	Black，Clear/Transparent，Colors Available
Forms	Pellets
Processing Method	Blow Molding，Extrusion，Film Extrusion，Injection Molding，Machining，Profile Extrusion，Sheet Extrusion，Thermoforming

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.29		ASTM D792
Melt Mass-Flow Rate (MFR) (365°C/5.0 kg)	12 to 17	g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.125 in)	7.0E-3	in/in	ASTM D955
Water Absorption			ASTM D570
24 hr	0.37	%
Equilibrium	1.1	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (0.125 in)	340000	psi	ASTM D638
Tensile Strength (0.125 in)	10100	psi	ASTM D638
Tensile Elongation			ASTM D638
Yield, 0.125 in	7.2	%
Break, 0.125 in	60 to 120	%
Flexural Modulus (0.125 in)	350000	psi	ASTM D790
Flexural Strength (5.0% Strain, 0.125 in)	13200	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.125 in)	13	ft·lb/in	ASTM D256
Tensile Impact Strength (0.125 in)	190	ft·lb/in2	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)	405	°F	ASTM D648
Glass Transition Temperature	428	°F	ASTM E1356
CLTE - Flow (0.125 in)	3.1E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	9.0E+15	ohms·cm	ASTM D257
Dielectric Strength			ASTM D149
0.00100 in	> 5000	V/mil
0.125 in	380	V/mil
Dielectric Constant (0.125 in, 60 Hz)	3.44		ASTM D150
Flammability	Nominal Value	Unit	Test Method
Flame Rating 3 (0.030 in)	V-0		UL 94

Optical	Nominal Value		Test Method
Refractive Index	1.672		ASTM D542

Additional Information	Nominal Value	Unit
Steam Sterilization - w/ Morpholine 4	> 1000	Cycles

Injection	Nominal Value	Unit
Drying Temperature	300	°F
Drying Time	2.5	hr
Processing (Melt) Temp	680 to 735	°F
Mold Temperature	280 to 325	°F
Screw Compression Ratio	2.2:1.0
Extrusion	Nominal Value	Unit
Drying Temperature	340	°F
Drying Time	4.0	hr
Cylinder Zone 1 Temp.	640 to 730	°F
Cylinder Zone 2 Temp.	640 to 730	°F
Cylinder Zone 3 Temp.	640 to 730	°F
Cylinder Zone 4 Temp.	640 to 730	°F
Cylinder Zone 5 Temp.	640 to 730	°F
Adapter Temperature	620 to 700	°F
Melt Temperature	650 to 750	°F
Die Temperature	620 to 700	°F

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Radel? R-5500

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service