低调看直播jrs高清直播,日韩一区精品视频一区二区,91成人区

Stanyl? TQ300F5

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TQ300F5
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized

Product information

Stanyl? TQ300F5

Polyamide 46

Product Description:

25% Glass Reinforced, Heat Stabilized

Special Features:

Heat stabilized or stable to heat

Used In:

Automotive Bearing Cages

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Filler / Reinforcement	Glass Fiber, 25% Filler by Weight
Additive	Heat Stabilizer
Features	Heat Stabilized
Uses	Automotive Applications、Bearings
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46-GF25

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.4	%
Flow	0.50	%
Water Absorption			ISO 62
Saturation, 73°F	10	%
Equilibrium, 73°F, 50% RH	2.8	%
Viscosity Number	150	cm3/g	ISO 307

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.26E+6	psi	ISO 527-2
Tensile Stress (Break)	26800	psi	ISO 527-2
Tensile Strain (Break)	4.0	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)	4.8	ft·lb/in2	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	554	°F	ISO 75-2/B
264 psi, Unannealed	554	°F	ISO 75-2/A
Glass Transition Temperature 2	167	°F	ISO 11357-2
Vicat Softening Temperature	554	°F	ISO 306/B50
Melting Temperature 2	563	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.4E-5	in/in/°F
Transverse	3.3E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time	2.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	581 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Stanyl? TQ300F5

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service