www.久久久久,最新国产福利在线,a级毛片免费高清在线播放

Arnite? T06 200

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polybutylene Terephthalate（PBT）
Product No: Arnite? T06 200
Product Quantity: 25KG / BAG
Product Features: Low Viscosity

Product information

Arnite? T06 200

Polybutylene Terephthalate

Product Description:

Low Viscosity, Injection Molding, Extrusion

Special Features:

Low viscosity

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Features	Low Viscosity
Processing Method	Extrusion，Injection Molding
Multi-Point Data	Isochronous Stress vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Heat vs. Temperature (ISO 11403-2) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PBT

Physical	Nominal Value	Unit	Test Method
Density	1.30	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)	1.34	in3/10min	ISO 1133
Water Absorption			ISO 62
Saturation, 73°F	0.45	%
Equilibrium, 73°F, 50% RH	0.18	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	392000	psi	ISO 527-2
Tensile Stress (Yield)	7980	psi	ISO 527-2
Tensile Strain (Yield)	3.5	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	2.4	ft·lb/in2
73°F	2.4	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	No Break
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	329	°F	ISO 75-2/B
264 psi, Unannealed	131	°F	ISO 75-2/A
Melting Temperature 3	437	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	5.0E-5	in/in/°F
Transverse	5.0E-5	in/in/°F
Effective Thermal Diffusivity	4.65E-8	m2/s

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	690	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.50
1 MHz	3.20
Dissipation Factor			IEC 60250
100 Hz	2.0E-3
1 MHz	0.020
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.030 in	HB
0.06 in	HB

Fill Analysis	Nominal Value	Unit
Melt Density	1.04	g/cm3
Melt Thermal Conductivity	0.76	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.540	Btu/lb/°F

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	446 to 464	°F
Middle Temperature	446 to 482	°F
Front Temperature	464 to 500	°F
Nozzle Temperature	464 to 500	°F
Processing (Melt) Temp	464 to 518	°F
Mold Temperature	140 to 212	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Arnite? T06 200

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service