jizz在线播放,国内精品伊人久久久久网站 ,日韩欧美国产精品综合嫩v

Akulon? F132

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6（PA6）
Product No: Akulon F132
Product Quantity: 25KG / BAG
Product Features: High Viscosity

Product information

Akulon? F132

Polyamide 6

Product Description:

Film Extrusion, High Viscosity

Special Features:

High viscosity

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Features	High Viscosity
Processing Method	Extrusion
Multi-Point Data	Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PA6

Physical	Nominal Value	Unit	Test Method
Density	1.13	g/cm3	ISO 1183
Water Absorption			ISO 62
Saturation, 73°F	9.5	%
Equilibrium, 73°F, 50% RH	2.5	%
Viscosity Number	210	cm3/g	ISO 307

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ISO 8295
Dynamic	1.0
Static	1.2
Films	Nominal Value	Unit	Test Method
Tensile Modulus 2	65300	psi	Internal Method
Tensile Stress - MD			ISO 527-3
Yield	4640	psi
Break	12000	psi
Tensile Elongation - MD (Break)	350	%	ISO 527-3
Trouser Tear - Parallel	32.0		ISO 6383-1
Water Vapor Transmission Rate (73°F, 85% RH)	2.3	g/100 in2/24 hr	DIS 15106-1/-3
Oxygen Transmission Rate			DIS 15105-1/-2
0% RH : 73°F	26	cm3/m2/bar/24 hr
85% RH : 73°F	38	cm3/m2/bar/24 hr

Thermal	Nominal Value	Unit	Test Method
Melting Temperature 3	428	°F	ISO 11357-3
CLTE - Flow	5.0E-5	in/in/°F	ISO 11359-2
Specific Heat Capacity	0.370	Btu/lb/°F

Optical	Nominal Value	Unit	Test Method
Clarity	83	%	Internal Method

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (500°F)	1.12E+6	mPa·s	Internal Method
Average Specific Heat Capacity (68 to 302°F)	0.609	Btu/lb/°F
Additional Information	Nominal Value	Unit	Test Method
Puncture Resistance	24.4	ft·lb/in	Internal Method
RSV - Formic Acid, 1g/100ml	3.20		Internal Method

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	446 to 455	°F
Middle Temperature	455 to 482	°F
Front Temperature	464 to 500	°F
Nozzle Temperature	464 to 518	°F
Processing (Melt) Temp	464 to 527	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Akulon? F132

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service