chinesexxxx国产麻豆,亚洲欧美日韩成人高清在线一区,欧美性猛交xxxx乱大交

Akulon? K223-HM6

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6（PA6）
Product No: Akulon K223-HM6
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized

Product information

Akulon? K223-HM6

Polyamide 6

Product Description:

30% Mineral Reinforced, Heat Stabilized

Special Features:

Contains release agent

Heat stabilized or stable to heat

Used In:

Pulley covers

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Filler / Reinforcement	Mineral, 30% Filler by Weight
Additive	Heat Stabilizer、Mold Release
Features	Heat Stabilized
Uses	Protective Coverings
Processing Method	Injection Molding
Multi-Point Data	Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PA6-MD30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.38	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.69	--	%
Flow	0.79	--	%
Water Absorption				ISO 62
Saturation, 73°F	6.6	--	%
Equilibrium, 73°F, 50% RH	1.9	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.02E+6	435000	psi	ISO 527-2
Tensile Stress (Break)	10900	5800	psi	ISO 527-2
Tensile Strain (Break)	3.0	15	%	ISO 527-2
Flexural Modulus	870000	--	psi	ISO 178
Flexural Stress	18900	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	0.95	1.4	ft·lb/in2
73°F	1.4	1.9	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	19	19	ft·lb/in2
73°F	19	24	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	401	--	°F	ISO 75-2/B
264 psi, Unannealed	275	--	°F	ISO 75-2/A
Melting Temperature 3	428	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	2.2E-5	--	in/in/°F
Transverse	2.2E-5	--	in/in/°F
Effective Thermal Diffusivity	1.14E-7	--	m2/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Electric Strength	760	640	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.20	15.0
1 MHz	3.00	4.50
Dissipation Factor				IEC 60250
100 Hz	5.0E-3	0.35
1 MHz	0.013	0.11
Comparative Tracking Index	500	500	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.028 in	HB	--
0.06 in	HB	--

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.16	--	g/cm3
Melt Thermal Conductivity	2.2	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.586	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	491 to 509	°F
Middle Temperature	509 to 527	°F
Front Temperature	509 to 536	°F
Nozzle Temperature	500 to 536	°F
Processing (Melt) Temp	482 to 545	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Akulon? K223-HM6

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service