老熟妇性老熟妇性色,插b内射18免费视频,国内精品久久久久久久97牛牛

Akulon? Ultraflow K-FHG6/B

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6（PA6）
Product No: Akulon Ultraflow K-FHG6/B
Product Quantity: 25KG / BAG
Product Features: Flame Retardant，Good Flow，Heat Stabilized

Product information

Akulon? Ultraflow K-FHG6/B

Polyamide 6

Product Description:

30% Glass Reinforced, Heat Stabilized, High Flow, Improved Processing

Special Features:

Good or high flow

Heat stabilized or stable to heat

Used In:

Lift truck steering wheel

Garlic press

Integrated Air Inlet Manifolds (up to 180°C)

Oil Sumps and Pans

Transmission Oil Pans

Fans & Shrouds

HVAC lamellae

Automotive Connectors (2)

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Additive	Heat Stabilizer
Features	Good Flow、Heat Stabilized
Uses	Automotive Applications、Connectors
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA6-GF30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.35	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.1	--	%
Flow	0.30	--	%
Water Absorption				ISO 62
Saturation, 73°F	6.0	--	%
Equilibrium, 73°F, 50% RH	1.8	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.36E+6	827000	psi	ISO 527-2
Tensile Stress (Break)	23200	15200	psi	ISO 527-2
Tensile Strain (Break)	3.0	7.0	%	ISO 527-2
Flexural Modulus	1.23E+6	--	psi	ISO 178
Flexural Stress	34100	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	4.8	4.8	ft·lb/in2
73°F	6.7	10	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	31	31	ft·lb/in2
73°F	40	43	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	428	--	°F	ISO 75-2/B
264 psi, Unannealed	392	--	°F	ISO 75-2/A
Melting Temperature 2	428	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	1.1E-5	--	in/in/°F
Transverse	3.9E-5	--	in/in/°F
Effective Thermal Diffusivity	1.08E-7	--	m2/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	> 1.0E+15	1.0E+14	ohms·cm	IEC 60093
Relative Permittivity				IEC 60250
100 Hz	3.50	14.0
1 MHz	3.30	5.00
Dissipation Factor				IEC 60250
100 Hz	5.0E-3	0.30
1 MHz	0.015	0.12
Comparative Tracking Index	--	500	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.12	--	g/cm3
Melt Thermal Conductivity	1.9	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.538	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	446 to 482	°F
Middle Temperature	446 to 500	°F
Front Temperature	446 to 500	°F
Nozzle Temperature	482 to 536	°F
Processing (Melt) Temp	473 to 518	°F
Mold Temperature	104 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Akulon? Ultraflow K-FHG6/B

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service