Zytel? HTN 54G15HSLR NC010
HIGH PERFORMANCE POLYAMIDE RESIN
Product Description:
15% Glass Reinforced, Toughened, PPA, High Performance Polyamide
Filler / Reinforcement | |
Additive | |
Features | |
RoHS Compliance | |
Forms | |
Processing Method | |
Multi-Point Data | |
Part Marking Code (ISO 11469) | |
Part Marking Code (SAE J1344) | |
Resin ID (ISO 1043) | |
Density | 1.25 | -- | g/cm3 | ISO 1183 |
Molding Shrinkage |
|
|
| ISO 294-4 |
Across Flow | 0.70 | -- | % |
|
Flow | 0.40 | -- | % |
|
Tensile Modulus | 812000 | 798000 | psi | ISO 527-2 |
Tensile Stress (Break) | 18900 | 14500 | psi | ISO 527-2 |
Tensile Strain (Break) | 3.7 | 2.7 | % | ISO 527-2 |
Tensile Creep Modulus |
|
|
| ISO 899-1 |
1 hr | -- | 798000 | psi |
|
1000 hr | -- | 725000 | psi |
|
Flexural Modulus | 711000 | -- | psi | ISO 178 |
Poisson's Ratio | 0.35 | 0.35 |
| ISO 527 |
Charpy Notched Impact Strength(73°F) | 2.9 | -- | ft·lb/in2 | ISO 179/1eA |
Charpy Unnotched Impact Strength(73°F) | 33 | 29 | ft·lb/in2 | ISO 179/1eU |
Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed | 536 | -- | °F | ISO 75-2/B |
264 psi, Unannealed | 455 | -- | °F | ISO 75-2/A |
Melting Temperature 3 | 572 | -- | °F | ISO 11357-3 |
CLTE |
|
|
| ISO 11359-2 |
Flow | 1.6E-5 | -- | in/in/°F |
|
Flow : -40 to 73°F | 1.8E-5 | -- | in/in/°F |
|
Transverse | 3.9E-5 | -- | in/in/°F |
|
Transverse : -40 to 73°F | 3.9E-5 | -- | in/in/°F |
|
Surface Resistivity | -- | > 1.0E+15 | ohms | IEC 60093 |
Volume Resistivity | > 1.0E+15 | > 1.0E+15 | ohms·cm | IEC 60093 |
Electric Strength | 420 | -- | V/mil | IEC 60243-1 |
Dissipation Factor |
|
|
| IEC 60250 |
100 Hz | 0.015 | -- |
|
|
1 MHz | 0.015 | -- |
|
|
Comparative Tracking Index | 575 | 575 | V | IEC 60112 |
Burning Rate 4 (0.0394 in) | < 3.9 | -- | in/min | ISO 3795 |
Flame Rating |
|
|
|
|
0.031 in | HB | -- |
| UL 94 |
0.06 in | HB | -- |
| UL 94, IEC 60695-11-10, -20 |
0.03 in | HB | -- |
| IEC 60695-11-10, -20 |
Oxygen Index | 23 | -- | % | ISO 4589-2 |
FMVSS Flammability | B | -- |
| FMVSS 302 |
Drying Temperature | 212 | °F |
|
Drying Time - Desiccant Dryer | 6.0 to 8.0 | hr |
|
Suggested Max Moisture | 0.10 | % |
|
Processing (Melt) Temp | 608 to 626 | °F |
|
Melt Temperature, Optimum | 617 | °F |
|
Mold Temperature | 194 to 230 | °F |
|
Drying Recommended | yes |
|
|
