TEL:+86-21-60409713FAX:+86-21-33275763
產品產商：索爾維（SOLVAY） 產品產地：進口/中國 產品類別：Algoflon PTFE 產品型號：Algoflon F 7 產品規格：25KG/包 產品特性：耐化學性良好
Algoflon? F 7
Optimum mechanical properties
Optimum isotropic properties
Very good electrical properties
Excellent surface finishing
Excellent skivability
耐化學性良好
FDA 21 CFR 177.1550
白色
粉狀
壓縮模塑
Algoflon? F 7 is processed according to methods generally used for normal compression molding. Prior to use, the powder must be conditioned above 19°C/66°F.
The processing involves typically two steps: preforming and sintering. Initially the powder is compacted into a preform. This is then sintered using precise sintering (heating and cooling) cycle to take the temperature above the PTFE crystalline melting point to attain the final article. The preforming pressure, dwell time at maximum sintering temperature and cooling rate are all established according to the shape and size of the final item.
Algoflon? PTFE fine cut powders must be stored and handled carefully to achieve defect-free molding. Before use the temperature of the powder must be conditioned above 19°C/66°F (between 21-27°C/70-81°F). Below this temperature the powder is difficult to mold without cracks. Temperatures that are too high should also be avoided to prevent powder lumping and poor flow.
Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.
Before using Algoflon? PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help.
Do not smoke in areas contaminated with powder, vapor or fumes.
See Material Safety Data Sheet for detailed advice on waste disposal methods.
Algoflon? F 7 is packaged in 25 kg nonreturnable drums. Each drum contains two bag liners made of polyethylene resin.
For Material Safety Data Sheet or additional technical information, consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com
如需索爾維（SOLVAY）原廠物性表及相關文件，請聯系我們工作人員，謝謝！
產品被廣泛應用于塑料改性、汽車、建筑、電子電氣、工業、日用品等多種領域
上海朗祺塑膠原料有限公司 滬ICP備12022668號 公安機關備案號：31011202003696
